Digilock Range: Express Register Manager Keys
Initial Setup
The Programming Key can quickly program the same Manager Keys to operate multiple locks.
Go to the lock already programmed to operate with the Manager Keys. Press C, Key symbol, 6, 6, Key Symbol. The LED will turn on.
While the LED is on, insert the Yellow Programming Key. A two-tone beep will be heard and the LED will turn off.
At each lock to be programmed, insert the Yellow Programming Key. A two-tone beep will be heard and the LED will flash once to indicate successful programming.
To end Express Registration mode: Go to any programmed lock. Press C then Key Symbol then insert the Yellow Programming Key.* Note: The latch will automatically release and relock 6 seconds after unlocking.
* The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.