3-1/2" Steel Pipe Swing Hanger

: $47.62 Save (27 %)

SKU: SH127 Category:

Jensen Swing Steel Pipe Swing Hanger is 3 1/2” O.D. with an 11” circumference.  It has a .51 ID oil light bearing and axle bolt with lock tight nut and accepts a 12mm bolt. The lower half of the swing hanger body has a figure eight pendulum with a sintered bronze bearing incorporated into it, to reduce wear. The pendulum is 1” wide and is a completely closed figure eight so that the connecting S-hook or shackle can not be dislodged from the hanger. The two halves of the hanger are bolted together with a 12mm carriage bolt with a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder so the bearing does not ride on the threads. It also has a lock tight nut.

  • These swing hangers feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts
  • The stamped steel has more ability to bend, so they will not snap when torqued too tightly

S-Hooks that can be used from chain to swing hanger:

H-Shackle that can be used from chain to swing hanger:

Weight 2.6 lbs
Dimensions 6 × 3 × 2 in

Scroll to Top